Product Specification

 

 

 

 

AdvantEdge 400 TF
Replenisher

 

Alkaline Etchant for Printed Circuit Boards

 

Description

                         

AdvantEdge 400 TF is designed for high volume production of printed circuit boards.  It offers excellent line width control, elimination of slivering, consistent etch rates and superior undercut protection.  The relatively low operating pH of AdvantEdge 400 TF increases the ability of typical resists to withstand the tendency to soften or lift. As indicated by the initials “TF”, all this is achieved without the addition of thiourea.

 

AdvantEdge 400 TF is designed for use in conveyorized spray etching equipment having thermostatic temperature controls and proper ventilation.  The venting system must be capable of creating a slight negative pressure in order to confine ammonia fumes to the etch chamber.

 

Composition of AdvantEdge 400 TF Replenisher Solution

 

 

Property/(Unit)

Typical Specifications

Ammonium Chloride - g/l

         225

-

239

Ammonium Chloride – N or mol/l

        4.21

-

4.47

Total Alkalinity - g/l

         390

-

420

Total Alkalinity - N

        6.38

-

6.87

Copper - ppm

 

<

70

pH

          9.8

-

10.0

 

1550 Research Way
Indianapolis, IN 46231
Phone: 317-486-5880
Fax: 317-486-5888

© 2003 Micronutrients
A Division of Heritage Technologies, LLC

ISO 9001:2000 Registered